|
654 | TODO | Other printers | Validate / Test Nidac Copal printers | Requires testing | 2023-10-01 |
Task Description
DPB-4000 aka Fujifilm ASK4000 aka DNP Q8. DPB-6000 aka Fujifilm ASK2000 DPB-7000 aka Fujifilm ASK2500 All models are in Gutenprint, and DBP-6000 is reported to work without any special backend. But I want to confirm the rest work, and maybe write a backend so we can run status queries etc? |
|
500 | TODO | Other printers | Add support for the Shinko S8145 | Waiting on Customer | 2023-10-01 |
Task Description
The T1/S8145 is a fancy "silver foil" thingey with two print heads. Won't happen until a user with one shows up. |
|
655 | TODO | Canon Selphy CP/ES | Figure out if matte printing is possible on SelphyNeo m... | New | 2022-11-26 |
Task Description
If you print from the printer's UI, it allows you to select various overcoat patterns -- glossy, a matte-like texture, a finer matte texture, and for some, a fine grid pattern.
The windows drivers don't seem to export this at all. See if this is a fluke. |
|
649 | TODO | Shinko CHC-S6145/S2245 | Support the Kodak 6900/6950 and HiTi M610 | Requires testing | 2021-08-13 |
Task Description
The Kodak 6900 is actually the CHC-S2245-6A The Kodak 6950 is actually the CHC-S2245-6C HiTi M610 is also a rebadged S2245 We have the USB VID/PIDs already; just need a printer to test with. |
|
505 | TODO | Other printers | Verify support for Mitsubishi CP3020D/DA printers (and ... | Requires testing | 2021-08-05 |
Task Description
Experimental support is in gutenprint, but this needs testing. |
|
630 | TODO | Canon Selphy CP/ES | Investigate port 59223 on wifi-enabled Selphy models | Researching | 2021-06-10 |
Task Description
On CP900, CP910, CP1200, and CP1300, a telnet interface is present on port 59223. Upon connecting, it prompts for an unknown password. |
|
656 | TODO | Mitsubishi CP-Dxx family | Validate / Test Fujifilm ASK-500 | Waiting on Customer | 2021-03-31 |
Task Description
It's a rebadged CP-M1. Backend support is theoretically complete (except for the USB VID/PID). No gutenprint frontend work yet; I'll hold off on that until I know the backend functions properly. |
|
608 | TODO | Common Code | Make Gutenprint more cross-compile friendly | New | 2020-03-27 |
Task Description
The problem is that, at compile time, we rely on some host-compiled stuff to generate data files and whatnot. We need to compile the same stuff for the target.
I wonder if it may be worth moving to a more unified Make environment.. |
|
641 | TODO | Common Code | Rewrite README into more structured ocumentation | New | 2020-03-05 |
Task Description
I'd like to use this as an opportunity to learn ReStructuredText, and the Sphinx documentation system.
How far I take this is another matter.. |
|
568 | TODO | Mitsubishi CP-Dxx family | Figure out how to set the "user string" that's supposed... | New | 2017-03-23 |
Task Description
There's a proper serial number returned so that's not so critical. |
|
634 | Feature Request | Shinko CHC-S6245/ Kodak 8810 | Support Panorama sizes on EK8810 | Requires testing | 2024-01-21 |
Task Description
EK8810 in the APEX system supports: 8x14, 8x16, 8x18, 8x20, 8x22, 8x24, 8x32, and 8x36 print sizes. (8x32, and 8x36 are presumably only available on 8x12 media) Figure out how to make this happen. And what needs to be done on the overlapping areas. |
|
632 | Feature Request | Mitsubishi CP-Dxx family | Support Panorama on CP-D90DW family | Requires testing | 2024-01-21 |
Task Description
Printer supports combining two or three 6x8 prints into 6x14 or 6x20 panoramas. Figure out how to do this. |
|
680 | Feature Request | Shinko CHC-S6145/S2245 | Support Panorama on Kodak 6900/6950 models | New | 2024-01-07 |
Task Description
These variations of the S2245 can generate multi-panel panoramas. No idea how this implemented yet. |
|
682 | Feature Request | Kodak 605/70xx | Firmware update support on Sinfonia models | Researching | 2024-01-06 |
Task Description
(Includes rebranded variants like Kodaks..) |
|
683 | Feature Request | Mitsubishi CP-Dxx family | Firmware update support on Mitsubishi models | New | 2024-01-01 |
Task Description
Such as the CP-D70 series. |
|
681 | Feature Request | HiTi family | Firmware update support on HiTi models | New | 2024-01-01 |
Task Description
no task description |
|
668 | Feature Request | DNP/Citizen | Support Fujifilm ASK-400 | Waiting on Customer | 2023-12-31 |
Task Description
Appears to be a rebadged Citizen CX-02 / DNP DS620 Main questions are what the VID/PID/IEEE1284 IDs are, and what firmware features were stripped out vs the other models. (Eg rewind support, partial matte, and more) |
|
678 | Feature Request | HiTi family | Figure out what the 'p' 'm' and 'r' quality identifier ... | Researching | 2023-12-15 |
Task Description
h == Normal Quality q == High Quality p/m/r == ??? There's also the LUT files with H/M/T quality codes. |
|
629 | Feature Request | HiTi family | Support the HiTi CS-2xx card models. | Waiting on Customer | 2023-11-30 |
Task Description
HiTi supplied source code, in an "open source all rights reserved" drop |
|
569 | Feature Request | Mitsubishi CP9xxx family | Figure out image processing algorithms for CP-98xx fami... | Requires testing | 2023-11-25 |
Task Description
They're an older-generation of the D70 family's. Data tables are unfortunately embedded inside the drivers, which makes this a lot more challenging. Sigh.
(If nothing else, simply obtaining the RGB->YMC conversion/gamma tables would make the printers immediately useful..) |
|
677 | Feature Request | Shinko CHC-S6245/ Kodak 8810 | Support updating lamination data on Sinfonia models (ie... | New | 2023-10-30 |
Task Description
The EK8810 (and likely others) allow the current lamination data to be updated/replaced. This potentially allows for a partial matte feature on all of these printers. |
|
658 | Feature Request | DNP/Citizen | Support the citizen cx-02-s | Waiting on Customer | 2023-10-01 |
Task Description
it's an "enhanced" verison of the CX02, but it supports sticker media. Figure out if it has a different USB ID and what all needs changing. |
|
537 | Feature Request | Other printers | Write backend for Shinko DP-1045 and Kodak D4000 | Waiting on Customer | 2023-10-01 |
Task Description
Aka ColorStream D3 They're the same thing, an 8" wide duplex printer. No support in Gutenprint yet. |
|
666 | Feature Request | Other printers | Support Kodak D4600 | Requires testing | 2023-10-01 |
Task Description
This is a rebadged version of the Mitsubishi CP-W5000. It likely has a unique USB VID/PID but it may also require tweaks to the command stream. Until someone pops up with one of these, it's not going to happen. |
|
674 | Feature Request | Other printers | Support iDRPT 4x6 printer (Zeva 1966) | New | 2023-09-27 |
Task Description
4x6, sheet fed, has USB port. |
|
672 | Feature Request | Other printers | Investigate HP Sprocket Studio printers | New | 2023-09-27 | |
|
667 | Feature Request | Other printers | Support Liele Amber / M200 (4x6) | New | 2023-09-27 | |
|
671 | Feature Request | HiTi family | Support P110 family | New | 2023-09-10 | |
|
670 | Feature Request | HiTi family | Support P530D | Waiting on Customer | 2023-09-10 | |
|
669 | Feature Request | HiTi family | Support X610 | Waiting on Customer | 2023-09-10 | |
|
665 | Feature Request | HiTi family | Supprt "sheet" models like the P310 and P320 series. | Waiting on Customer | 2023-06-12 | |
|
659 | Feature Request | Kodak 605/70xx | support "watermarking" on the EK70xx series | Waiting on Customer | 2022-06-24 | |
|
663 | Feature Request | Common Code | Make backend capable of parsing PPD options | New | 2021-10-28 | |
|
662 | Feature Request | Common Code | Add support for more STATEs and ATTRibutes | New | 2021-09-30 | |
|
651 | Feature Request | Sony UP-D printers | brightness/contrast, etc on the UP-D898 family | New | 2021-09-08 | |
|
556 | Feature Request | Sony UP-D printers | status queries and flow control | Researching | 2021-08-15 | |
|
660 | Feature Request | Mitsubishi CP-Dxx family | Figure out how to decode cut count and skip count on D7... | New | 2021-05-16 | |
|
657 | Feature Request | Mitsubishi CP-Dxx family | Query and set vertical calibration | Assigned | 2021-05-16 | |
|
613 | Feature Request | Mitsubishi CP-Dxx family | Figure out how to pipeline jobs with D70 family | New | 2021-02-20 | |
|
653 | Feature Request | Mitsubishi MedSci | Implement Sharpening on the CP9xxx and CP30 printer fam... | New | 2020-12-06 | |
|
652 | Feature Request | Sony UP-D printers | Print combining for UP-DR200 | New | 2020-12-02 | |
|
520 | Feature Request | Sony UP-D printers | Investigate Sony UP-CR20L aka DNP SL-20 | Requires testing | 2020-11-10 | |
|
585 | Feature Request | Zebra printers | Add support for Zebra ID card printers. | New | 2020-03-17 | |
|
572 | Feature Request | Mitsubishi MedSci | Figure out how to set printer sharpening on the P95D | New | 2020-02-27 | |
|
624 | Feature Request | Kodak 605/70xx | Figure out backprinting on Kodak 7010 and 7015 | Requires testing | 2019-09-23 | |
|
548 | Feature Request | Shinko CHC-S6145/S2245 | Add support for Sinfonia CHC-S6145-5A (aka CS2-c) | New | 2019-06-04 | |
|
557 | Feature Request | Sony UP-D printers | Investigate Sony DPP-FP30 | New | 2019-03-26 | |
|
567 | Feature Request | Mitsubishi CP-Dxx family | Figure out how to query the overall job status on the D... | New | 2017-03-23 | |
|
565 | Feature Request | Mitsubishi CP9xxx family | CP-9600 family supposedly supports some sort of multicu... | New | 2017-03-23 | |
|
673 | Bug Report | Other printers | Support more modern Kodak Dock printers | New | 2023-09-27 | |