|
673 | Bug Report | Other printers | Support more modern Kodak Dock printers | New | 2023-09-27 |
Task Description
Dock Plus, Dock Premium. Might be wifi only though. |
|
588 | Bug Report | Magicard family | Registration/Alignment issue with Black plane | New | 2018-01-04 |
Task Description
K extraction appears to work well, but when printing there's a registration problem. The black layer appears to print several pixels higher than the color layers.
I'm not sure if this is something that needs a fixed offset applied, or is something that can vary printer-printer. |
|
580 | Bug Report | Canon Selphy CP/ES | Detect when on battery power and handle it gracefully | New | 2022-12-12 |
Task Description
User reported the CP800 failed to print when on battery power, turns out one of the status fields changed causing us to fail. I believe that's resovled for the older SELPHY CP models, but the newer ones (including the CP790) and the ES series are likely to have a similar problem.
Not sure what can be done about this without getting the battery and experimenting... |
|
537 | Feature Request | Other printers | Write backend for Shinko DP-1045 and Kodak D4000 | Waiting on Customer | 2023-10-01 |
Task Description
Aka ColorStream D3 They're the same thing, an 8" wide duplex printer. No support in Gutenprint yet. |
|
665 | Feature Request | HiTi family | Supprt "sheet" models like the P310 and P320 series. | Waiting on Customer | 2023-06-12 |
Task Description
I have a P461 now, and it's different enough to be annoying. Turns out there are three major families, "roll type", "sheet type" and "card type" and the commands aren't all the same. !%!%# |
|
669 | Feature Request | HiTi family | Support X610 | Waiting on Customer | 2023-09-10 |
Task Description
Three-head high-speed model capable of near-arbitary print lengths. |
|
659 | Feature Request | Kodak 605/70xx | support "watermarking" on the EK70xx series | Waiting on Customer | 2022-06-24 |
Task Description
Kodak's feature set refers to a textual "watermark" on the print surface. This is presumably the same as DNP's "parial matte" feature. Figure out how to mak ethis happen. |
|
677 | Feature Request | Shinko CHC-S6245/ Kodak 8810 | Support updating lamination data on Sinfonia models (ie... | New | 2023-10-30 |
Task Description
The EK8810 (and likely others) allow the current lamination data to be updated/replaced. This potentially allows for a partial matte feature on all of these printers. |
|
629 | Feature Request | HiTi family | Support the HiTi CS-2xx card models. | Waiting on Customer | 2023-11-30 |
Task Description
HiTi supplied source code, in an "open source all rights reserved" drop |
|
658 | Feature Request | DNP/Citizen | Support the citizen cx-02-s | Waiting on Customer | 2023-10-01 |
Task Description
it's an "enhanced" verison of the CX02, but it supports sticker media. Figure out if it has a different USB ID and what all needs changing. |
|
634 | Feature Request | Shinko CHC-S6245/ Kodak 8810 | Support Panorama sizes on EK8810 | Requires testing | 2024-01-21 |
Task Description
EK8810 in the APEX system supports: 8x14, 8x16, 8x18, 8x20, 8x22, 8x24, 8x32, and 8x36 print sizes. (8x32, and 8x36 are presumably only available on 8x12 media) Figure out how to make this happen. And what needs to be done on the overlapping areas. |
|
680 | Feature Request | Shinko CHC-S6145/S2245 | Support Panorama on Kodak 6900/6950 models | New | 2024-01-07 |
Task Description
These variations of the S2245 can generate multi-panel panoramas. No idea how this implemented yet. |
|
632 | Feature Request | Mitsubishi CP-Dxx family | Support Panorama on CP-D90DW family | Requires testing | 2024-01-21 |
Task Description
Printer supports combining two or three 6x8 prints into 6x14 or 6x20 panoramas. Figure out how to do this. |
|
670 | Feature Request | HiTi family | Support P530D | Waiting on Customer | 2023-09-10 |
Task Description
Duplexing 6" model. Unfortunately will need sniffs. |
|
671 | Feature Request | HiTi family | Support P110 family | New | 2023-09-10 |
Task Description
HiTi has a binary-only driver for this. Unlikely to see support given its age and limited media availability. |
|
667 | Feature Request | Other printers | Support Liele Amber / M200 (4x6) | New | 2023-09-27 |
Task Description
It's more or less equivalen tto the SELPHY series. 1280px wide print head, 300x300 dpi. |
|
666 | Feature Request | Other printers | Support Kodak D4600 | Requires testing | 2023-10-01 |
Task Description
This is a rebadged version of the Mitsubishi CP-W5000. It likely has a unique USB VID/PID but it may also require tweaks to the command stream. Until someone pops up with one of these, it's not going to happen. |
|
674 | Feature Request | Other printers | Support iDRPT 4x6 printer (Zeva 1966) | New | 2023-09-27 |
Task Description
4x6, sheet fed, has USB port. |
|
668 | Feature Request | DNP/Citizen | Support Fujifilm ASK-400 | Waiting on Customer | 2023-12-31 |
Task Description
Appears to be a rebadged Citizen CX-02 / DNP DS620 Main questions are what the VID/PID/IEEE1284 IDs are, and what firmware features were stripped out vs the other models. (Eg rewind support, partial matte, and more) |
|
556 | Feature Request | Sony UP-D printers | status queries and flow control | Researching | 2021-08-15 |
Task Description
It would be really nice if we could figure out how to query the UP-DR200's printer status, media counts, flow control, etc etc. |
|
657 | Feature Request | Mitsubishi CP-Dxx family | Query and set vertical calibration | Assigned | 2021-05-16 |
Task Description
A user has a EK305 that cuts about 1mm off. Mitsubshi's service manuals reference a "Service Tool" that can adjust this calibration (and other things) |
|
652 | Feature Request | Sony UP-D printers | Print combining for UP-DR200 | New | 2020-12-02 |
Task Description
The UP-DR200, under Windows, will automatically combine two 4x6 copies into a single 8x6" print. I have a sniff of this happening; figure out how it works, and implement in the backend if feasible. |
|
663 | Feature Request | Common Code | Make backend capable of parsing PPD options | New | 2021-10-28 |
Task Description
The goal here is to make FastReturn a runtime option specified through the PPD, as not every spool file format can be extended to add this awareness. Implementing this would probaably reqire the backend to depend on libcups and its PPD/option parsing stuff. |
|
520 | Feature Request | Sony UP-D printers | Investigate Sony UP-CR20L aka DNP SL-20 | Requires testing | 2020-11-10 |
Task Description
Sony sold their printer line to DNP, which rebranded these two models. Investigate their Spool format, and find out if they need an intelligent backend. |
|
557 | Feature Request | Sony UP-D printers | Investigate Sony DPP-FP30 | New | 2019-03-26 |
Task Description
And other members of that consumer printer family. Not sure if they're still relevant commercially. |
|
672 | Feature Request | Other printers | Investigate HP Sprocket Studio printers | New | 2023-09-27 | |
|
653 | Feature Request | Mitsubishi MedSci | Implement Sharpening on the CP9xxx and CP30 printer fam... | New | 2020-12-06 | |
|
682 | Feature Request | Kodak 605/70xx | Firmware update support on Sinfonia models | Researching | 2024-01-06 | |
|
683 | Feature Request | Mitsubishi CP-Dxx family | Firmware update support on Mitsubishi models | New | 2024-01-01 | |
|
681 | Feature Request | HiTi family | Firmware update support on HiTi models | New | 2024-01-01 | |
|
678 | Feature Request | HiTi family | Figure out what the 'p' 'm' and 'r' quality identifier ... | Researching | 2023-12-15 | |
|
569 | Feature Request | Mitsubishi CP9xxx family | Figure out image processing algorithms for CP-98xx fami... | Requires testing | 2023-11-25 | |
|
572 | Feature Request | Mitsubishi MedSci | Figure out how to set printer sharpening on the P95D | New | 2020-02-27 | |
|
567 | Feature Request | Mitsubishi CP-Dxx family | Figure out how to query the overall job status on the D... | New | 2017-03-23 | |
|
613 | Feature Request | Mitsubishi CP-Dxx family | Figure out how to pipeline jobs with D70 family | New | 2021-02-20 | |
|
660 | Feature Request | Mitsubishi CP-Dxx family | Figure out how to decode cut count and skip count on D7... | New | 2021-05-16 | |
|
624 | Feature Request | Kodak 605/70xx | Figure out backprinting on Kodak 7010 and 7015 | Requires testing | 2019-09-23 | |
|
565 | Feature Request | Mitsubishi CP9xxx family | CP-9600 family supposedly supports some sort of multicu... | New | 2017-03-23 | |
|
651 | Feature Request | Sony UP-D printers | brightness/contrast, etc on the UP-D898 family | New | 2021-09-08 | |
|
585 | Feature Request | Zebra printers | Add support for Zebra ID card printers. | New | 2020-03-17 | |
|
548 | Feature Request | Shinko CHC-S6145/S2245 | Add support for Sinfonia CHC-S6145-5A (aka CS2-c) | New | 2019-06-04 | |
|
662 | Feature Request | Common Code | Add support for more STATEs and ATTRibutes | New | 2021-09-30 | |
|
505 | TODO | Other printers | Verify support for Mitsubishi CP3020D/DA printers (and ... | Requires testing | 2021-08-05 | |
|
654 | TODO | Other printers | Validate / Test Nidac Copal printers | Requires testing | 2023-10-01 | |
|
656 | TODO | Mitsubishi CP-Dxx family | Validate / Test Fujifilm ASK-500 | Waiting on Customer | 2021-03-31 | |
|
649 | TODO | Shinko CHC-S6145/S2245 | Support the Kodak 6900/6950 and HiTi M610 | Requires testing | 2021-08-13 | |
|
641 | TODO | Common Code | Rewrite README into more structured ocumentation | New | 2020-03-05 | |
|
608 | TODO | Common Code | Make Gutenprint more cross-compile friendly | New | 2020-03-27 | |
|
630 | TODO | Canon Selphy CP/ES | Investigate port 59223 on wifi-enabled Selphy models | Researching | 2021-06-10 | |
|
655 | TODO | Canon Selphy CP/ES | Figure out if matte printing is possible on SelphyNeo m... | New | 2022-11-26 | |