CUPS Dyesub Backends

  • Status Closed
  • Percent Complete
    100%
  • Task Type Feature Request
  • Category DNP/Citizen
  • Assigned To
    Solomon Peachy
  • Operating System All
  • Severity Low
  • Priority Medium
  • Reported Version 1.0
  • Due in Version Undecided
  • Due Date Undecided
  • Votes
  • Private
Attached to Project: CUPS Dyesub Backends
Opened by Solomon Peachy - 2019-07-10
Last edited by Solomon Peachy - 2019-07-16

FS#622 - Support Windows Spool format for DNP printers

Gutenprint generates a spool file of native printer commands. The windows drivers use an intermediate format instead. To support folks printing from windows, the backend should support the windows spool format.

This will have to cover the RX1[HS], DS40, DS80, DS80DX, DS620, DS820.

Closed by  Solomon Peachy
2019-07-16 03:34
Reason for closing:  Implemented
Additional comments about closing:  Just needs to be tested on DS620 and DS820, and we're done.
Admin
Solomon Peachy commented on 2019-07-10 01:44
Decoded spool format for the RX1. Not all printer functionality is exposed, but it should be sufficient. Still need to add it to the backend before I can move onto the next one.
Admin
Solomon Peachy commented on 2019-07-15 00:42
RX1 support fully implemented. Close (but not identical to) the CW-01 format. I'll try to do DS40 & DS80 next.
Admin
Solomon Peachy commented on 2019-07-15 03:38
DS40 and DS80 are essentially the same. DS80DX, DS620, DS820 remaining.
Admin
Solomon Peachy commented on 2019-07-15 03:53
DS80DX seems to use the same format, but the windows driver keels over. DS620 and DS820 need to be done still, but I'm going to assume they're the same. Will validate later.
Admin
Solomon Peachy commented on 2019-07-15 04:27
Success printing on the RX1! So the approach is sound.
Admin
Solomon Peachy commented on 2019-07-16 02:33
DS620 implemented.

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing