|
500 | TODO | Other printers | Add support for the Shinko S8145 | Waiting on Customer | 2023-10-01 |
Task Description
The T1/S8145 is a fancy "silver foil" thingey with two print heads. Won't happen until a user with one shows up. |
|
505 | TODO | Other printers | Verify support for Mitsubishi CP3020D/DA printers (and ... | Requires testing | 2021-08-05 |
Task Description
Experimental support is in gutenprint, but this needs testing. |
|
520 | Feature Request | Sony UP-D printers | Investigate Sony UP-CR20L aka DNP SL-20 | Requires testing | 2020-11-10 |
Task Description
Sony sold their printer line to DNP, which rebranded these two models. Investigate their Spool format, and find out if they need an intelligent backend. |
|
537 | Feature Request | Other printers | Write backend for Shinko DP-1045 and Kodak D4000 | Waiting on Customer | 2023-10-01 |
Task Description
Aka ColorStream D3 They're the same thing, an 8" wide duplex printer. No support in Gutenprint yet. |
|
548 | Feature Request | Shinko CHC-S6145/S2245 | Add support for Sinfonia CHC-S6145-5A (aka CS2-c) | New | 2019-06-04 |
Task Description
It's a card-sized variant of the CS2. 89mm cards of various widths. |
|
556 | Feature Request | Sony UP-D printers | status queries and flow control | Researching | 2021-08-15 |
Task Description
It would be really nice if we could figure out how to query the UP-DR200's printer status, media counts, flow control, etc etc. |
|
557 | Feature Request | Sony UP-D printers | Investigate Sony DPP-FP30 | New | 2019-03-26 |
Task Description
And other members of that consumer printer family. Not sure if they're still relevant commercially. |
|
565 | Feature Request | Mitsubishi CP9xxx family | CP-9600 family supposedly supports some sort of multicu... | New | 2017-03-23 |
Task Description
http://www.mitsubishi-photo.cz/drivers/drivers_printers/cz_en/(%20+firmwaredrivers_printers_digi_en.htm
This references a lot of firmware images, including 'Firmware CP9600 for 13x18,10x15(x2),11.5x15(x2).zip -- None of those sizes are covered in the current Gutenprint code. |
|
567 | Feature Request | Mitsubishi CP-Dxx family | Figure out how to query the overall job status on the D... | New | 2017-03-23 |
Task Description
The command I know about just returns an endless status stream.. |
|
568 | TODO | Mitsubishi CP-Dxx family | Figure out how to set the "user string" that's supposed... | New | 2017-03-23 |
Task Description
There's a proper serial number returned so that's not so critical. |
|
569 | Feature Request | Mitsubishi CP9xxx family | Figure out image processing algorithms for CP-98xx fami... | Requires testing | 2023-11-25 |
Task Description
They're an older-generation of the D70 family's. Data tables are unfortunately embedded inside the drivers, which makes this a lot more challenging. Sigh.
(If nothing else, simply obtaining the RGB->YMC conversion/gamma tables would make the printers immediately useful..) |
|
572 | Feature Request | Mitsubishi MedSci | Figure out how to set printer sharpening on the P95D | New | 2020-02-27 |
Task Description
The P93D supports it via the driver, but the P95D doesn't. However, it can be set on the front panel.. It's in there somewhere, I bet.
Bonus -- Can we enable/disable iserial support? |
|
580 | Bug Report | Canon Selphy CP/ES | Detect when on battery power and handle it gracefully | New | 2022-12-12 |
Task Description
User reported the CP800 failed to print when on battery power, turns out one of the status fields changed causing us to fail. I believe that's resovled for the older SELPHY CP models, but the newer ones (including the CP790) and the ES series are likely to have a similar problem.
Not sure what can be done about this without getting the battery and experimenting... |
|
585 | Feature Request | Zebra printers | Add support for Zebra ID card printers. | New | 2020-03-17 |
Task Description
I have a P120i that is in perfect working order. |
|
588 | Bug Report | Magicard family | Registration/Alignment issue with Black plane | New | 2018-01-04 |
Task Description
K extraction appears to work well, but when printing there's a registration problem. The black layer appears to print several pixels higher than the color layers.
I'm not sure if this is something that needs a fixed offset applied, or is something that can vary printer-printer. |
|
608 | TODO | Common Code | Make Gutenprint more cross-compile friendly | New | 2020-03-27 |
Task Description
The problem is that, at compile time, we rely on some host-compiled stuff to generate data files and whatnot. We need to compile the same stuff for the target.
I wonder if it may be worth moving to a more unified Make environment.. |
|
613 | Feature Request | Mitsubishi CP-Dxx family | Figure out how to pipeline jobs with D70 family | New | 2021-02-20 |
Task Description
Right now the backend won't attempt to send anything over if a given deck is printing. However, the printer has 4*num_banks buffers that can be used to pipeline jobs!
So, try to figure out a way to overlap things. We'll have to be smarter about jobids.. |
|
624 | Feature Request | Kodak 605/70xx | Figure out backprinting on Kodak 7010 and 7015 | Requires testing | 2019-09-23 |
Task Description
No documentation, no driver option, no idea how to drive it |
|
629 | Feature Request | HiTi family | Support the HiTi CS-2xx card models. | Waiting on Customer | 2023-11-30 |
Task Description
HiTi supplied source code, in an "open source all rights reserved" drop |
|
630 | TODO | Canon Selphy CP/ES | Investigate port 59223 on wifi-enabled Selphy models | Researching | 2021-06-10 |
Task Description
On CP900, CP910, CP1200, and CP1300, a telnet interface is present on port 59223. Upon connecting, it prompts for an unknown password. |
|
632 | Feature Request | Mitsubishi CP-Dxx family | Support Panorama on CP-D90DW family | Requires testing | 2024-01-21 |
Task Description
Printer supports combining two or three 6x8 prints into 6x14 or 6x20 panoramas. Figure out how to do this. |
|
634 | Feature Request | Shinko CHC-S6245/ Kodak 8810 | Support Panorama sizes on EK8810 | Requires testing | 2024-01-21 |
Task Description
EK8810 in the APEX system supports: 8x14, 8x16, 8x18, 8x20, 8x22, 8x24, 8x32, and 8x36 print sizes. (8x32, and 8x36 are presumably only available on 8x12 media) Figure out how to make this happen. And what needs to be done on the overlapping areas. |
|
641 | TODO | Common Code | Rewrite README into more structured ocumentation | New | 2020-03-05 |
Task Description
I'd like to use this as an opportunity to learn ReStructuredText, and the Sphinx documentation system.
How far I take this is another matter.. |
|
649 | TODO | Shinko CHC-S6145/S2245 | Support the Kodak 6900/6950 and HiTi M610 | Requires testing | 2021-08-13 |
Task Description
The Kodak 6900 is actually the CHC-S2245-6A The Kodak 6950 is actually the CHC-S2245-6C HiTi M610 is also a rebadged S2245 We have the USB VID/PIDs already; just need a printer to test with. |
|
651 | Feature Request | Sony UP-D printers | brightness/contrast, etc on the UP-D898 family | New | 2021-09-08 |
Task Description
There's presumably a way to configure this stuff from the host side, In a FILE output mode the Windows drivers don't allow these settings to be changed, so to make this happen I'll have to obtain sniffs. |
|
652 | Feature Request | Sony UP-D printers | Print combining for UP-DR200 | New | 2020-12-02 | |
|
653 | Feature Request | Mitsubishi MedSci | Implement Sharpening on the CP9xxx and CP30 printer fam... | New | 2020-12-06 | |
|
654 | TODO | Other printers | Validate / Test Nidac Copal printers | Requires testing | 2023-10-01 | |
|
655 | TODO | Canon Selphy CP/ES | Figure out if matte printing is possible on SelphyNeo m... | New | 2022-11-26 | |
|
656 | TODO | Mitsubishi CP-Dxx family | Validate / Test Fujifilm ASK-500 | Waiting on Customer | 2021-03-31 | |
|
657 | Feature Request | Mitsubishi CP-Dxx family | Query and set vertical calibration | Assigned | 2021-05-16 | |
|
658 | Feature Request | DNP/Citizen | Support the citizen cx-02-s | Waiting on Customer | 2023-10-01 | |
|
659 | Feature Request | Kodak 605/70xx | support "watermarking" on the EK70xx series | Waiting on Customer | 2022-06-24 | |
|
660 | Feature Request | Mitsubishi CP-Dxx family | Figure out how to decode cut count and skip count on D7... | New | 2021-05-16 | |
|
662 | Feature Request | Common Code | Add support for more STATEs and ATTRibutes | New | 2021-09-30 | |
|
663 | Feature Request | Common Code | Make backend capable of parsing PPD options | New | 2021-10-28 | |
|
665 | Feature Request | HiTi family | Supprt "sheet" models like the P310 and P320 series. | Waiting on Customer | 2023-06-12 | |
|
666 | Feature Request | Other printers | Support Kodak D4600 | Requires testing | 2023-10-01 | |
|
667 | Feature Request | Other printers | Support Liele Amber / M200 (4x6) | New | 2023-09-27 | |
|
668 | Feature Request | DNP/Citizen | Support Fujifilm ASK-400 | Waiting on Customer | 2023-12-31 | |
|
669 | Feature Request | HiTi family | Support X610 | Waiting on Customer | 2023-09-10 | |
|
670 | Feature Request | HiTi family | Support P530D | Waiting on Customer | 2023-09-10 | |
|
671 | Feature Request | HiTi family | Support P110 family | New | 2023-09-10 | |
|
672 | Feature Request | Other printers | Investigate HP Sprocket Studio printers | New | 2023-09-27 | |
|
673 | Bug Report | Other printers | Support more modern Kodak Dock printers | New | 2023-09-27 | |
|
674 | Feature Request | Other printers | Support iDRPT 4x6 printer (Zeva 1966) | New | 2023-09-27 | |
|
677 | Feature Request | Shinko CHC-S6245/ Kodak 8810 | Support updating lamination data on Sinfonia models (ie... | New | 2023-10-30 | |
|
678 | Feature Request | HiTi family | Figure out what the 'p' 'm' and 'r' quality identifier ... | Researching | 2023-12-15 | |
|
680 | Feature Request | Shinko CHC-S6145/S2245 | Support Panorama on Kodak 6900/6950 models | New | 2024-01-07 | |
|
681 | Feature Request | HiTi family | Firmware update support on HiTi models | New | 2024-01-01 | |