|
634 | Feature Request | Shinko CHC-S6245/ Kodak 8810 | Support Panorama sizes on EK8810 | Requires testing | 2024-01-21 |
Task Description
EK8810 in the APEX system supports: 8x14, 8x16, 8x18, 8x20, 8x22, 8x24, 8x32, and 8x36 print sizes. (8x32, and 8x36 are presumably only available on 8x12 media) Figure out how to make this happen. And what needs to be done on the overlapping areas. |
|
632 | Feature Request | Mitsubishi CP-Dxx family | Support Panorama on CP-D90DW family | Requires testing | 2024-01-21 |
Task Description
Printer supports combining two or three 6x8 prints into 6x14 or 6x20 panoramas. Figure out how to do this. |
|
680 | Feature Request | Shinko CHC-S6145/S2245 | Support Panorama on Kodak 6900/6950 models | New | 2024-01-07 |
Task Description
These variations of the S2245 can generate multi-panel panoramas. No idea how this implemented yet. |
|
682 | Feature Request | Kodak 605/70xx | Firmware update support on Sinfonia models | Researching | 2024-01-06 |
Task Description
(Includes rebranded variants like Kodaks..) |
|
683 | Feature Request | Mitsubishi CP-Dxx family | Firmware update support on Mitsubishi models | New | 2024-01-01 |
Task Description
Such as the CP-D70 series. |
|
681 | Feature Request | HiTi family | Firmware update support on HiTi models | New | 2024-01-01 |
Task Description
no task description |
|
668 | Feature Request | DNP/Citizen | Support Fujifilm ASK-400 | Waiting on Customer | 2023-12-31 |
Task Description
Appears to be a rebadged Citizen CX-02 / DNP DS620 Main questions are what the VID/PID/IEEE1284 IDs are, and what firmware features were stripped out vs the other models. (Eg rewind support, partial matte, and more) |
|
678 | Feature Request | HiTi family | Figure out what the 'p' 'm' and 'r' quality identifier ... | Researching | 2023-12-15 |
Task Description
h == Normal Quality q == High Quality p/m/r == ??? There's also the LUT files with H/M/T quality codes. |
|
629 | Feature Request | HiTi family | Support the HiTi CS-2xx card models. | Waiting on Customer | 2023-11-30 |
Task Description
HiTi supplied source code, in an "open source all rights reserved" drop |
|
569 | Feature Request | Mitsubishi CP9xxx family | Figure out image processing algorithms for CP-98xx fami... | Requires testing | 2023-11-25 |
Task Description
They're an older-generation of the D70 family's. Data tables are unfortunately embedded inside the drivers, which makes this a lot more challenging. Sigh.
(If nothing else, simply obtaining the RGB->YMC conversion/gamma tables would make the printers immediately useful..) |
|
677 | Feature Request | Shinko CHC-S6245/ Kodak 8810 | Support updating lamination data on Sinfonia models (ie... | New | 2023-10-30 |
Task Description
The EK8810 (and likely others) allow the current lamination data to be updated/replaced. This potentially allows for a partial matte feature on all of these printers. |
|
658 | Feature Request | DNP/Citizen | Support the citizen cx-02-s | Waiting on Customer | 2023-10-01 |
Task Description
it's an "enhanced" verison of the CX02, but it supports sticker media. Figure out if it has a different USB ID and what all needs changing. |
|
654 | TODO | Other printers | Validate / Test Nidac Copal printers | Requires testing | 2023-10-01 |
Task Description
DPB-4000 aka Fujifilm ASK4000 aka DNP Q8. DPB-6000 aka Fujifilm ASK2000 DPB-7000 aka Fujifilm ASK2500 All models are in Gutenprint, and DBP-6000 is reported to work without any special backend. But I want to confirm the rest work, and maybe write a backend so we can run status queries etc? |
|
537 | Feature Request | Other printers | Write backend for Shinko DP-1045 and Kodak D4000 | Waiting on Customer | 2023-10-01 |
Task Description
Aka ColorStream D3 They're the same thing, an 8" wide duplex printer. No support in Gutenprint yet. |
|
500 | TODO | Other printers | Add support for the Shinko S8145 | Waiting on Customer | 2023-10-01 |
Task Description
The T1/S8145 is a fancy "silver foil" thingey with two print heads. Won't happen until a user with one shows up. |
|
666 | Feature Request | Other printers | Support Kodak D4600 | Requires testing | 2023-10-01 |
Task Description
This is a rebadged version of the Mitsubishi CP-W5000. It likely has a unique USB VID/PID but it may also require tweaks to the command stream. Until someone pops up with one of these, it's not going to happen. |
|
674 | Feature Request | Other printers | Support iDRPT 4x6 printer (Zeva 1966) | New | 2023-09-27 |
Task Description
4x6, sheet fed, has USB port. |
|
673 | Bug Report | Other printers | Support more modern Kodak Dock printers | New | 2023-09-27 |
Task Description
Dock Plus, Dock Premium. Might be wifi only though. |
|
672 | Feature Request | Other printers | Investigate HP Sprocket Studio printers | New | 2023-09-27 |
Task Description
Similar to the SELPHY models, 4x6" print sheet fed. Might be wifi only. |
|
667 | Feature Request | Other printers | Support Liele Amber / M200 (4x6) | New | 2023-09-27 |
Task Description
It's more or less equivalen tto the SELPHY series. 1280px wide print head, 300x300 dpi. |
|
671 | Feature Request | HiTi family | Support P110 family | New | 2023-09-10 |
Task Description
HiTi has a binary-only driver for this. Unlikely to see support given its age and limited media availability. |
|
670 | Feature Request | HiTi family | Support P530D | Waiting on Customer | 2023-09-10 |
Task Description
Duplexing 6" model. Unfortunately will need sniffs. |
|
669 | Feature Request | HiTi family | Support X610 | Waiting on Customer | 2023-09-10 |
Task Description
Three-head high-speed model capable of near-arbitary print lengths. |
|
665 | Feature Request | HiTi family | Supprt "sheet" models like the P310 and P320 series. | Waiting on Customer | 2023-06-12 |
Task Description
I have a P461 now, and it's different enough to be annoying. Turns out there are three major families, "roll type", "sheet type" and "card type" and the commands aren't all the same. !%!%# |
|
580 | Bug Report | Canon Selphy CP/ES | Detect when on battery power and handle it gracefully | New | 2022-12-12 |
Task Description
User reported the CP800 failed to print when on battery power, turns out one of the status fields changed causing us to fail. I believe that's resovled for the older SELPHY CP models, but the newer ones (including the CP790) and the ES series are likely to have a similar problem.
Not sure what can be done about this without getting the battery and experimenting... |
|
655 | TODO | Canon Selphy CP/ES | Figure out if matte printing is possible on SelphyNeo m... | New | 2022-11-26 | |
|
659 | Feature Request | Kodak 605/70xx | support "watermarking" on the EK70xx series | Waiting on Customer | 2022-06-24 | |
|
663 | Feature Request | Common Code | Make backend capable of parsing PPD options | New | 2021-10-28 | |
|
662 | Feature Request | Common Code | Add support for more STATEs and ATTRibutes | New | 2021-09-30 | |
|
651 | Feature Request | Sony UP-D printers | brightness/contrast, etc on the UP-D898 family | New | 2021-09-08 | |
|
556 | Feature Request | Sony UP-D printers | status queries and flow control | Researching | 2021-08-15 | |
|
649 | TODO | Shinko CHC-S6145/S2245 | Support the Kodak 6900/6950 and HiTi M610 | Requires testing | 2021-08-13 | |
|
505 | TODO | Other printers | Verify support for Mitsubishi CP3020D/DA printers (and ... | Requires testing | 2021-08-05 | |
|
630 | TODO | Canon Selphy CP/ES | Investigate port 59223 on wifi-enabled Selphy models | Researching | 2021-06-10 | |
|
660 | Feature Request | Mitsubishi CP-Dxx family | Figure out how to decode cut count and skip count on D7... | New | 2021-05-16 | |
|
657 | Feature Request | Mitsubishi CP-Dxx family | Query and set vertical calibration | Assigned | 2021-05-16 | |
|
656 | TODO | Mitsubishi CP-Dxx family | Validate / Test Fujifilm ASK-500 | Waiting on Customer | 2021-03-31 | |
|
613 | Feature Request | Mitsubishi CP-Dxx family | Figure out how to pipeline jobs with D70 family | New | 2021-02-20 | |
|
653 | Feature Request | Mitsubishi MedSci | Implement Sharpening on the CP9xxx and CP30 printer fam... | New | 2020-12-06 | |
|
652 | Feature Request | Sony UP-D printers | Print combining for UP-DR200 | New | 2020-12-02 | |
|
520 | Feature Request | Sony UP-D printers | Investigate Sony UP-CR20L aka DNP SL-20 | Requires testing | 2020-11-10 | |
|
608 | TODO | Common Code | Make Gutenprint more cross-compile friendly | New | 2020-03-27 | |
|
585 | Feature Request | Zebra printers | Add support for Zebra ID card printers. | New | 2020-03-17 | |
|
641 | TODO | Common Code | Rewrite README into more structured ocumentation | New | 2020-03-05 | |
|
572 | Feature Request | Mitsubishi MedSci | Figure out how to set printer sharpening on the P95D | New | 2020-02-27 | |
|
624 | Feature Request | Kodak 605/70xx | Figure out backprinting on Kodak 7010 and 7015 | Requires testing | 2019-09-23 | |
|
548 | Feature Request | Shinko CHC-S6145/S2245 | Add support for Sinfonia CHC-S6145-5A (aka CS2-c) | New | 2019-06-04 | |
|
557 | Feature Request | Sony UP-D printers | Investigate Sony DPP-FP30 | New | 2019-03-26 | |
|
588 | Bug Report | Magicard family | Registration/Alignment issue with Black plane | New | 2018-01-04 | |
|
568 | TODO | Mitsubishi CP-Dxx family | Figure out how to set the "user string" that's supposed... | New | 2017-03-23 | |