|
565 | Feature Request | Mitsubishi CP9xxx family | CP-9600 family supposedly supports some sort of multicu... | New | 2017-03-23 |
Task Description
http://www.mitsubishi-photo.cz/drivers/drivers_printers/cz_en/(%20+firmwaredrivers_printers_digi_en.htm
This references a lot of firmware images, including 'Firmware CP9600 for 13x18,10x15(x2),11.5x15(x2).zip -- None of those sizes are covered in the current Gutenprint code. |
|
567 | Feature Request | Mitsubishi CP-Dxx family | Figure out how to query the overall job status on the D... | New | 2017-03-23 |
Task Description
The command I know about just returns an endless status stream.. |
|
568 | TODO | Mitsubishi CP-Dxx family | Figure out how to set the "user string" that's supposed... | New | 2017-03-23 |
Task Description
There's a proper serial number returned so that's not so critical. |
|
588 | Bug Report | Magicard family | Registration/Alignment issue with Black plane | New | 2018-01-04 |
Task Description
K extraction appears to work well, but when printing there's a registration problem. The black layer appears to print several pixels higher than the color layers.
I'm not sure if this is something that needs a fixed offset applied, or is something that can vary printer-printer. |
|
557 | Feature Request | Sony UP-D printers | Investigate Sony DPP-FP30 | New | 2019-03-26 |
Task Description
And other members of that consumer printer family. Not sure if they're still relevant commercially. |
|
548 | Feature Request | Shinko CHC-S6145/S2245 | Add support for Sinfonia CHC-S6145-5A (aka CS2-c) | New | 2019-06-04 |
Task Description
It's a card-sized variant of the CS2. 89mm cards of various widths. |
|
624 | Feature Request | Kodak 605/70xx | Figure out backprinting on Kodak 7010 and 7015 | Requires testing | 2019-09-23 |
Task Description
No documentation, no driver option, no idea how to drive it |
|
572 | Feature Request | Mitsubishi MedSci | Figure out how to set printer sharpening on the P95D | New | 2020-02-27 |
Task Description
The P93D supports it via the driver, but the P95D doesn't. However, it can be set on the front panel.. It's in there somewhere, I bet.
Bonus -- Can we enable/disable iserial support? |
|
641 | TODO | Common Code | Rewrite README into more structured ocumentation | New | 2020-03-05 |
Task Description
I'd like to use this as an opportunity to learn ReStructuredText, and the Sphinx documentation system.
How far I take this is another matter.. |
|
585 | Feature Request | Zebra printers | Add support for Zebra ID card printers. | New | 2020-03-17 |
Task Description
I have a P120i that is in perfect working order. |
|
608 | TODO | Common Code | Make Gutenprint more cross-compile friendly | New | 2020-03-27 |
Task Description
The problem is that, at compile time, we rely on some host-compiled stuff to generate data files and whatnot. We need to compile the same stuff for the target.
I wonder if it may be worth moving to a more unified Make environment.. |
|
520 | Feature Request | Sony UP-D printers | Investigate Sony UP-CR20L aka DNP SL-20 | Requires testing | 2020-11-10 |
Task Description
Sony sold their printer line to DNP, which rebranded these two models. Investigate their Spool format, and find out if they need an intelligent backend. |
|
652 | Feature Request | Sony UP-D printers | Print combining for UP-DR200 | New | 2020-12-02 |
Task Description
The UP-DR200, under Windows, will automatically combine two 4x6 copies into a single 8x6" print. I have a sniff of this happening; figure out how it works, and implement in the backend if feasible. |
|
653 | Feature Request | Mitsubishi MedSci | Implement Sharpening on the CP9xxx and CP30 printer fam... | New | 2020-12-06 |
Task Description
I _think_ it's the same algorithm for both. So use the CP30 to work out what's needed, and test it out.
The library API is already there, so once ready it should just be drop-innable.
Note: This will also require extracting the data tables from the CP30 driver. |
|
613 | Feature Request | Mitsubishi CP-Dxx family | Figure out how to pipeline jobs with D70 family | New | 2021-02-20 |
Task Description
Right now the backend won't attempt to send anything over if a given deck is printing. However, the printer has 4*num_banks buffers that can be used to pipeline jobs!
So, try to figure out a way to overlap things. We'll have to be smarter about jobids.. |
|
656 | TODO | Mitsubishi CP-Dxx family | Validate / Test Fujifilm ASK-500 | Waiting on Customer | 2021-03-31 |
Task Description
It's a rebadged CP-M1. Backend support is theoretically complete (except for the USB VID/PID). No gutenprint frontend work yet; I'll hold off on that until I know the backend functions properly. |
|
657 | Feature Request | Mitsubishi CP-Dxx family | Query and set vertical calibration | Assigned | 2021-05-16 |
Task Description
A user has a EK305 that cuts about 1mm off. Mitsubshi's service manuals reference a "Service Tool" that can adjust this calibration (and other things) |
|
660 | Feature Request | Mitsubishi CP-Dxx family | Figure out how to decode cut count and skip count on D7... | New | 2021-05-16 |
Task Description
Cut count is on all of them but the guess is that it's only present in the eeprom dump rather than per-deck info. Skip count is on all printers that can rewind (I think) -- ie K60, D80, EK305. Also probably only in the eeprom dump instead of per-deck info. |
|
630 | TODO | Canon Selphy CP/ES | Investigate port 59223 on wifi-enabled Selphy models | Researching | 2021-06-10 |
Task Description
On CP900, CP910, CP1200, and CP1300, a telnet interface is present on port 59223. Upon connecting, it prompts for an unknown password. |
|
505 | TODO | Other printers | Verify support for Mitsubishi CP3020D/DA printers (and ... | Requires testing | 2021-08-05 |
Task Description
Experimental support is in gutenprint, but this needs testing. |
|
649 | TODO | Shinko CHC-S6145/S2245 | Support the Kodak 6900/6950 and HiTi M610 | Requires testing | 2021-08-13 |
Task Description
The Kodak 6900 is actually the CHC-S2245-6A The Kodak 6950 is actually the CHC-S2245-6C HiTi M610 is also a rebadged S2245 We have the USB VID/PIDs already; just need a printer to test with. |
|
556 | Feature Request | Sony UP-D printers | status queries and flow control | Researching | 2021-08-15 |
Task Description
It would be really nice if we could figure out how to query the UP-DR200's printer status, media counts, flow control, etc etc. |
|
651 | Feature Request | Sony UP-D printers | brightness/contrast, etc on the UP-D898 family | New | 2021-09-08 |
Task Description
There's presumably a way to configure this stuff from the host side, In a FILE output mode the Windows drivers don't allow these settings to be changed, so to make this happen I'll have to obtain sniffs. |
|
662 | Feature Request | Common Code | Add support for more STATEs and ATTRibutes | New | 2021-09-30 |
Task Description
Most of these wll need to be added on a per-family basis, though some at least can be handled in the markers code. From CUPS: cover-open, input-tray-missing, marker-supply-empty, marker-supply-low, media-empty, paused, timed-out RFC8011: other, door-open, interlock-open, media-jam, media-low, output-tray-missing, shutdown, Modern CUPS: marker-print-ribbon-almost-empty, marker-print-ribbon-empty, marker-print-ribbon-missing, output-tray-missing, power-down, power-up, subunit-warming-up, document-format-error (?) |
|
663 | Feature Request | Common Code | Make backend capable of parsing PPD options | New | 2021-10-28 |
Task Description
The goal here is to make FastReturn a runtime option specified through the PPD, as not every spool file format can be extended to add this awareness. Implementing this would probaably reqire the backend to depend on libcups and its PPD/option parsing stuff. |
|
659 | Feature Request | Kodak 605/70xx | support "watermarking" on the EK70xx series | Waiting on Customer | 2022-06-24 | |
|
655 | TODO | Canon Selphy CP/ES | Figure out if matte printing is possible on SelphyNeo m... | New | 2022-11-26 | |
|
580 | Bug Report | Canon Selphy CP/ES | Detect when on battery power and handle it gracefully | New | 2022-12-12 | |
|
665 | Feature Request | HiTi family | Supprt "sheet" models like the P310 and P320 series. | Waiting on Customer | 2023-06-12 | |
|
669 | Feature Request | HiTi family | Support X610 | Waiting on Customer | 2023-09-10 | |
|
670 | Feature Request | HiTi family | Support P530D | Waiting on Customer | 2023-09-10 | |
|
671 | Feature Request | HiTi family | Support P110 family | New | 2023-09-10 | |
|
667 | Feature Request | Other printers | Support Liele Amber / M200 (4x6) | New | 2023-09-27 | |
|
672 | Feature Request | Other printers | Investigate HP Sprocket Studio printers | New | 2023-09-27 | |
|
673 | Bug Report | Other printers | Support more modern Kodak Dock printers | New | 2023-09-27 | |
|
674 | Feature Request | Other printers | Support iDRPT 4x6 printer (Zeva 1966) | New | 2023-09-27 | |
|
666 | Feature Request | Other printers | Support Kodak D4600 | Requires testing | 2023-10-01 | |
|
500 | TODO | Other printers | Add support for the Shinko S8145 | Waiting on Customer | 2023-10-01 | |
|
537 | Feature Request | Other printers | Write backend for Shinko DP-1045 and Kodak D4000 | Waiting on Customer | 2023-10-01 | |
|
654 | TODO | Other printers | Validate / Test Nidac Copal printers | Requires testing | 2023-10-01 | |
|
658 | Feature Request | DNP/Citizen | Support the citizen cx-02-s | Waiting on Customer | 2023-10-01 | |
|
677 | Feature Request | Shinko CHC-S6245/ Kodak 8810 | Support updating lamination data on Sinfonia models (ie... | New | 2023-10-30 | |
|
569 | Feature Request | Mitsubishi CP9xxx family | Figure out image processing algorithms for CP-98xx fami... | Requires testing | 2023-11-25 | |
|
629 | Feature Request | HiTi family | Support the HiTi CS-2xx card models. | Waiting on Customer | 2023-11-30 | |
|
678 | Feature Request | HiTi family | Figure out what the 'p' 'm' and 'r' quality identifier ... | Researching | 2023-12-15 | |
|
668 | Feature Request | DNP/Citizen | Support Fujifilm ASK-400 | Waiting on Customer | 2023-12-31 | |
|
681 | Feature Request | HiTi family | Firmware update support on HiTi models | New | 2024-01-01 | |
|
683 | Feature Request | Mitsubishi CP-Dxx family | Firmware update support on Mitsubishi models | New | 2024-01-01 | |
|
682 | Feature Request | Kodak 605/70xx | Firmware update support on Sinfonia models | Researching | 2024-01-06 | |
|
680 | Feature Request | Shinko CHC-S6145/S2245 | Support Panorama on Kodak 6900/6950 models | New | 2024-01-07 | |