Gutenprint / CUPS Dye-sublimation drivers

This is my personal to-do list for printer-related tasks, encompassing both Gutenprint (https://gimp-print.sourceforge.io/) development and CUPS backend work (https://git.shaftnet.org/gitea/slp/selphy_print.git)

ID Task Type Category  desc Summary Status Last Edited
585Feature RequestZebra printersAdd support for Zebra ID card printers.New2020-03-17 Task Description

I have a P120i that is in perfect working order.

520Feature RequestSony UP-D printersInvestigate Sony UP-CR20L aka DNP SL-20Requires testing2020-11-10 Task Description

Sony sold their printer line to DNP, which rebranded these two models.

Investigate their Spool format, and find out if they need an intelligent backend.

556Feature RequestSony UP-D printersstatus queries and flow controlResearching2021-08-15 Task Description

It would be really nice if we could figure out how to query the UP-DR200's printer status, media counts, flow control, etc etc.

557Feature RequestSony UP-D printersInvestigate Sony DPP-FP30New2019-03-26 Task Description

And other members of that consumer printer family.  Not sure if they're still relevant commercially.

651Feature RequestSony UP-D printersbrightness/contrast, etc on the UP-D898 familyNew2021-09-08 Task Description

There's presumably a way to configure this stuff from the host side,  In a FILE output mode the Windows drivers don't allow these settings to be changed, so to make this happen I'll have to obtain sniffs.

652Feature RequestSony UP-D printersPrint combining for UP-DR200New2020-12-02 Task Description

The UP-DR200, under Windows, will automatically combine two 4x6 copies into a single 8x6" print.  I have a sniff of this happening; figure out how it works, and implement in the backend if feasible.

634Feature RequestShinko CHC-S6245/ Kodak 8810Support Panorama sizes on EK8810Requires testing2024-01-21 Task Description

EK8810 in the APEX system supports:

8x14, 8x16, 8x18, 8x20, 8x22, 8x24, 8x32, and 8x36 print sizes.

(8x32, and 8x36 are presumably only available on 8x12 media)

Figure out how to make this happen. And what needs to be done on the overlapping areas.

677Feature RequestShinko CHC-S6245/ Kodak 8810Support updating lamination data on Sinfonia models (ie...New2023-10-30 Task Description

The EK8810 (and likely others) allow the current lamination data to be updated/replaced.

This potentially allows for a partial matte feature on all of these printers.

548Feature RequestShinko CHC-S6145/S2245Add support for Sinfonia CHC-S6145-5A (aka CS2-c)New2019-06-04 Task Description

It's a card-sized variant of the CS2.  89mm cards of various widths.

680Feature RequestShinko CHC-S6145/S2245Support Panorama on Kodak 6900/6950 modelsNew2024-01-07 Task Description

These variations of the S2245 can generate multi-panel panoramas.

No idea how this implemented yet.

649TODOShinko CHC-S6145/S2245Support the Kodak 6900/6950 and HiTi M610Requires testing2021-08-13 Task Description

The Kodak 6900 is actually the CHC-S2245-6A

The Kodak 6950 is actually the CHC-S2245-6C

HiTi M610 is also a rebadged S2245

We have the USB VID/PIDs already; just need a printer to test with.

673Bug ReportOther printersSupport more modern Kodak Dock printersNew2023-09-27 Task Description

Dock Plus, Dock Premium.

Might be wifi only though.

537Feature RequestOther printersWrite backend for Shinko DP-1045 and Kodak D4000Waiting on Customer2023-10-01 Task Description

Aka ColorStream D3

They're the same thing, an 8" wide duplex printer. No support in Gutenprint yet.

666Feature RequestOther printersSupport Kodak D4600Requires testing2023-10-01 Task Description

This is a rebadged version of the Mitsubishi CP-W5000.   It likely has a unique USB VID/PID but it may also require tweaks to the command stream.

Until someone pops up with one of these, it's not going to happen.

667Feature RequestOther printersSupport Liele Amber / M200 (4x6)New2023-09-27 Task Description

It's more or less equivalen tto the SELPHY series.  1280px wide print head, 300x300 dpi.

 

672Feature RequestOther printersInvestigate HP Sprocket Studio printersNew2023-09-27 Task Description

Similar to the SELPHY models, 4x6" print sheet fed.

Might be wifi only.

674Feature RequestOther printersSupport iDRPT 4x6 printer (Zeva 1966)New2023-09-27 Task Description

4x6, sheet fed, has USB port.

500TODOOther printersAdd support for the Shinko S8145Waiting on Customer2023-10-01 Task Description

The T1/S8145 is a fancy "silver foil" thingey with two print heads.

Won't happen until a user with one shows up.

505TODOOther printersVerify support for Mitsubishi CP3020D/DA printers (and ...Requires testing2021-08-05 Task Description

Experimental support is in gutenprint, but this needs testing.

654TODOOther printersValidate / Test Nidac Copal printersRequires testing2023-10-01 Task Description

DPB-4000 aka Fujifilm ASK4000 aka DNP Q8.

DPB-6000 aka Fujifilm ASK2000

DPB-7000 aka Fujifilm ASK2500

 

All models are in Gutenprint, and DBP-6000 is reported to work without any special backend.  But I want to confirm the rest work, and maybe write a backend so we can run status queries etc?

572Feature RequestMitsubishi MedSciFigure out how to set printer sharpening on the P95DNew2020-02-27 Task Description

The P93D supports it via the driver, but the P95D doesn't.  However, it can be set on the front panel..  It's in there somewhere, I bet.

Bonus -- Can we enable/disable iserial support?

653Feature RequestMitsubishi MedSciImplement Sharpening on the CP9xxx and CP30 printer fam...New2020-12-06 Task Description

I _think_ it's the same algorithm for both.  So use the CP30 to work out what's needed, and test it out.

The library API is already there, so once ready it should just be drop-innable.

Note:  This will also require extracting the data tables from the CP30 driver.

567Feature RequestMitsubishi CP-Dxx familyFigure out how to query the overall job status on the D...New2017-03-23 Task Description

The command I know about just returns an endless status stream..

613Feature RequestMitsubishi CP-Dxx familyFigure out how to pipeline jobs with D70 familyNew2021-02-20 Task Description

Right now the backend won't attempt to send anything over if a given deck is printing. However, the printer has 4*num_banks buffers that can be used to pipeline jobs!

So, try to figure out a way to overlap things. We'll have to be smarter about jobids..

632Feature RequestMitsubishi CP-Dxx familySupport Panorama on CP-D90DW familyRequires testing2024-01-21 Task Description

Printer supports combining two or three 6x8 prints into 6x14 or 6x20 panoramas. Figure out how to do this.

657Feature RequestMitsubishi CP-Dxx familyQuery and set vertical calibrationAssigned2021-05-16
660Feature RequestMitsubishi CP-Dxx familyFigure out how to decode cut count and skip count on D7...New2021-05-16
683Feature RequestMitsubishi CP-Dxx familyFirmware update support on Mitsubishi modelsNew2024-01-01
568TODOMitsubishi CP-Dxx familyFigure out how to set the "user string" that's supposed...New2017-03-23
656TODOMitsubishi CP-Dxx familyValidate / Test Fujifilm ASK-500Waiting on Customer2021-03-31
565Feature RequestMitsubishi CP9xxx familyCP-9600 family supposedly supports some sort of multicu...New2017-03-23
569Feature RequestMitsubishi CP9xxx familyFigure out image processing algorithms for CP-98xx fami...Requires testing2023-11-25
588Bug ReportMagicard familyRegistration/Alignment issue with Black planeNew2018-01-04
624Feature RequestKodak 605/70xxFigure out backprinting on Kodak 7010 and 7015Requires testing2019-09-23
659Feature RequestKodak 605/70xxsupport "watermarking" on the EK70xx seriesWaiting on Customer2022-06-24
682Feature RequestKodak 605/70xxFirmware update support on Sinfonia modelsResearching2024-01-06
629Feature RequestHiTi familySupport the HiTi CS-2xx card models.Waiting on Customer2023-11-30
665Feature RequestHiTi familySupprt "sheet" models like the P310 and P320 series.Waiting on Customer2023-06-12
669Feature RequestHiTi familySupport X610Waiting on Customer2023-09-10
670Feature RequestHiTi familySupport P530DWaiting on Customer2023-09-10
671Feature RequestHiTi familySupport P110 familyNew2023-09-10
678Feature RequestHiTi familyFigure out what the 'p' 'm' and 'r' quality identifier ...Researching2023-12-15
681Feature RequestHiTi familyFirmware update support on HiTi modelsNew2024-01-01
658Feature RequestDNP/CitizenSupport the citizen cx-02-sWaiting on Customer2023-10-01
668Feature RequestDNP/CitizenSupport Fujifilm ASK-400Waiting on Customer2023-12-31
662Feature RequestCommon CodeAdd support for more STATEs and ATTRibutesNew2021-09-30
663Feature RequestCommon CodeMake backend capable of parsing PPD optionsNew2021-10-28
608TODOCommon CodeMake Gutenprint more cross-compile friendlyNew2020-03-27
641TODOCommon CodeRewrite README into more structured ocumentationNew2020-03-05
580Bug ReportCanon Selphy CP/ESDetect when on battery power and handle it gracefullyNew2022-12-12
Showing tasks 1 - 50 of 52 Page 1 of 2

Available keyboard shortcuts

Tasklist

Task Details

Task Editing